Views: 97 Author: Site Editor Publish Time: 2022-09-26 Origin: Site
First of all, you need to prepare some warm water, you must remember that the water should not be too hot, because most sub-bottles are made of plastic. For pp or silica gel travel sub-bottling, you can consider using boiling water. The method of using warm boiled water requires repeated rinsing with warm boiled water to separate bottles, about 10-15 times. Then use a hair dryer to blow dry with the maximum wind, let the demeanor and water flow speed create as sterile as possible in the travel and packaging environment.
Vinegar is a weak acid, which has a certain disinfection and sterilization effect. This method can be used to sterilize the sub-bottling. After the sub-bottling is disinfected with acetic acid, clean water should be used for cleaning, usually about 10 times.
First, rinse with clean water, then use detergent, rinse with clean water, and then disinfect with alcohol. Put the alcohol-sterilized sub-bottles in a ventilated place to dry.
When bottling with travel, in addition to disinfection, it is also necessary to grasp the amount of dispense lotion. Choosing the right bottle for packaging should also be combined with the travel time and how much you need to separate. It is best to control the amount that needs to be added in the bottle according to the number of travel days.